Skip to main content
FREE Delivery!|(208) 435-8080
Moscow, ID Rock, Gravel and Soil Delivery

Moscow, ID Rock, Gravel and Soil Delivery

Moscow is a mid-size city in Latah County. For a low yard, backfilled area or raised building pad, start with a clear plan for finished grade and compaction. Idaho Rock Supply provides bulk materials for projects that need dependable base, fill, drainage stone or a finished ground cover.

Bulk materials for Moscow grading and base work

Low areas need material selected for the job ahead. Use 3/4 Road Mix, also called 3/4 minus or road mix, where a compacted base is needed under a driveway or pad. For drainage around a structure or beneath a drain line, use open Drain Rock rather than a base material with fines. Snake River Rock gives beds, borders and exposed ground a rounded finished stone surface.

For a prepared base, 3/4 Road Mix follows ITD Section 703 3/4 inch aggregate base. Spread it in manageable lifts and compact each lift before adding more material. Measure length by width to get square footage, then use planned depth to estimate the quantity in cubic yards or tons.

Ground, frost and drainage planning in Latah County

Grade work starts by deciding where water needs to move after rain or snowmelt. Idaho's Palouse ground is deep loess that holds water, so base depth and drainage details need to match the actual soil at the job. Check the site before choosing material depth, especially where a low spot is being built up beside a driveway, pad or structure.

For fill, place material in lifts and compact it instead of dumping the full depth at once. A firm finished pad needs a compacted fill layer below the base course. Use 3/4 Road Mix above prepared fill where the project needs a stable driving or building surface.

Idaho's statewide frost-depth guide is 30 inches. This is a statewide guide, not a site-specific design figure, so confirm local frost and foundation requirements with the local building department before starting work that involves footings, utilities or structural support.

Delivery planning for Moscow and nearby towns

Moscow is in Latah County, and Genesee in Latah County lies about 10 miles south of Moscow. Lapwai lies about 21 miles south, while Lewiston lies about 36 miles south. St. Maries lies about 39 miles north, Plummer lies about 40 miles north, and Orofino lies about 40 miles east. Moscow sits about 67 miles south of Coeur d'Alene.

Use ZIP code 83843 when entering the delivery location. Before scheduling, mark the unload point, clear a route wide enough for the truck, and make sure the approach and dumping area are firm. Keep vehicles, overhead obstructions and people away from the unloading zone. Spring road limits in Idaho's Panhandle, weather and mountain travel conditions can affect scheduling, so book ahead when the project has a fixed work date.

Measure before you schedule

Use the online calculator to enter the project area and depth, then select the material and delivery date that fits the work plan. Order online after the unload location and truck access are ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Moscow, ID

What is the difference between 3/4 Road Mix and Drain Rock?

3/4 Road Mix contains fines that bind when watered and compacted, making it suitable for a firm base. Drain Rock is clean 3/4 stone, also called washed rock, with open spaces between pieces for water movement. Use the base material for support and the clean stone where drainage is the priority.

What should be ready before a dump truck arrives in Moscow?

Choose the exact unloading location before the truck reaches the property. Clear the access route, move parked vehicles and check for low branches or overhead lines. The dumping surface needs to support a loaded truck, and the driver needs room to raise the bed safely.

Should I use topsoil or fill dirt for a low area in a Latah County yard?

Use fill dirt to raise grade and build the bulk of a low area. Compact it in lifts where the finished surface needs support. Topsoil belongs at the surface where planting is planned, after grading and drainage work are complete.

How do I prepare a pad that needs added height?

Strip loose organic material where the pad will sit, then establish the needed finished elevation. Place fill in compacted lifts until the subgrade is built up. Add 3/4 Road Mix as the working base where the pad will carry vehicles or equipment.

Nearby